Nissan Versa

 sedan Owners Manual

Monitor, climate, audio, phone and voice recognition systems » NISSAN Voice Recognition System (if so equipped)
Using the system

Initialization

When the ignition switch is in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If the  button is pressed before the initialization completes, the system will announce: "Voice Recognition System not ready. Please wait."

Giving voice commands

1. Press the   button.

2. The system announces: "Please say a category like phone or a command like points of interest followed by a brand name". A list of available commands is then spoken by the system.

3. After the tone sounds and the face icon on the display changes, speak a command.

Available commands are discussed in this section.

4. Voice and display feedback are provided when the command is accepted.

• If the command is not recognized, the system announces: "Command not recognized".

  Repeat the command in a clear voice.

• If you want to cancel the command or go back to the previous menu of commands, press the button. The system will announce: "Canceling voice recognition" or "Go back" depending on the current menu level.
• Press the BACK button on the control panel to move back through the menus displayed on the screen.
• If you want to adjust the volume of the voice feedback, use the volume control switches on the steering wheel or the volume knob on the control panel.
• The voice command screen can also be accessed using the control panel display:

1. Press the [ ] button.

2. Touch the "Voice Commands" key.

Operating tips

To get the best performance out of NISSAN Voice Recognition, observe the following:

• Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing the voice commands correctly.
• Wait until a tone sounds before speaking a command. Otherwise, the command will not be received properly.
• Start speaking a command within 3.5 seconds after the tone sounds.
• Speak in a natural voice without pausing between words.

Using the system

System features

Bluetooth Hands-Free Phone System voice commands

Navigation System voice commands

Audio system voice commands

Information voice commands

Troubleshooting guide