Nissan Versa

 Sedan Service Manual

Driver information & multimedia » Warning chime system (WCS) » Diagnosis system (combination meter)
Type A

TYPE A : Diagnosis Description

ON BOARD DIAGNOSIS ITEM

The information display, speedometer and tachometer can be checked in self-diagnosis mode.

NOTE:

• Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to MWI "COMBINATION METER : Diagnosis Procedure". Replace combination meter if power supply and ground circuits are found to be normal and self-diagnosis mode does not start. Refer to MWI "Removal and Installation".
• Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter selfdiagnosis mode will exit upon turning the ignition switch to OFF.

METHOD OF STARTING

1. Turn the ignition switch OFF.

2. Turn the ignition switch ON while pressing and holding the switch (1) for 0.8 seconds or more.

3. Press the switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.)

4. The combination meter is turned to self-diagnosis mode.

- All segments of the information display are displayed.

5. Each meter activates by pressing the switch.

NOTE:

• If any of the meters or gauges is not activated, replace combination meter.
• The figure is reference.

TYPE A : CONSULT Function

APPLICATION ITEMS

CONSULT can display each diagnostic item using the diagnostic test modes shown.

SELF DIAG RESULT

Refer to MWI "DTC Index".

DATA MONITOR

Display Item List

NOTE:  Some items are not available according to vehicle specification.

SPECIAL FUNCTION

Special menu                   

W/L ON HISTORY

• Stores histories when warning/indicator lamp is turned on.
• "W/L ON HISTORY" indicates the "TIME" when the warning/ indicator lamp is turned on.
• The "TIME" above is:

- 0: The condition that the warning/indicator lamp has been turned on 1 or more times after starting the engine and waiting for 30 seconds.

- 1 - 39: The number of times the engine was restarted after the 0 condition.

- NO W/L ON HISTORY: Stores NO (0) turning on history of warning/indicator lamp.

NOTE:

• W/L ON HISTORY is not stored for approximately 30 seconds after the engine starts.
• Brake warning lamp does not store any history when the parking brake is applied or the brake fluid level gets low.

Display Item

Type A

Type B