Nissan Versa

 sedan Owners Manual

Starting and driving » Push-button ignition switch (if so equipped)
NISSAN Intelligent Key battery discharge

If the battery of the NISSAN Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Move the shift lever to the P (Park) or N (Neutral) position.

2. Firmly apply the foot brake.

3. Touch the ignition switch with the NISSAN Intelligent Key as illustrated. (A chime will sound.)

4. Push the ignition switch while depressing the brake pedal within 10 seconds after the chime sounds. The engine will start.

After step 3 is performed, when the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change to ACC.

NOTE:

• When the ignition switch is pushed to the ACC or ON position or the engine is started by the above procedures, the NISSAN Intelligent Key warning light may blink in yellow (on the meter) even if the NISSAN Intelligent Key is inside the vehicle. This is not a malfunction.

  To stop the warning light from blinking, touch the ignition switch with the NISSAN Intelligent Key again.

• If the NISSAN Intelligent Key warning light in the meter is blinking in green, replace the battery as soon as possible.

  For additional information, refer to "Battery replacement" in the "Do-ityourself" section of this manual.

Operating range

Push-button ignition switch positions

NISSAN Intelligent Key battery discharge

NISSAN Vehicle Immobilizer System