Nissan Versa

 sedan Owners Manual

Monitor, climate, audio, phone and voice recognition systems » Heater and Air Conditioner (manual)
Air conditioner operation

Start the engine, turn the   fan control dial to the desired position, and press the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation.

The air conditioner cooling function operates only when the engine is running.

Cooling

This mode is used to cool and dehumidify the air.

1. Move the air intake lever to the position.

2. Turn the air flow control dial to the position.

3. Turn the   fan control dial to the desired position.

4. Press the   button. The indicator light comes on.

5. Turn the temperature control dial to the desired position.

• For quick cooling when the outside temperature is high, move the air intake lever to the position. Be sure to return to the position for normal cooling.

Dehumidified heating

This mode is used to heat and dehumidify the air.

1. Move the air intake lever to the position.

2. Turn the air flow control dial to the  position.

3. Turn the   fan control dial to the desired position.

4. Press the  button. The indicator light comes on.

5. Turn the temperature control dial to the desired position.

Dehumidified defogging

This mode is used to defog the windows and dehumidify the air.

1. Move the air intake lever to the position.

2. Turn the air flow control dial to the position.

3. Turn the   fan control dial to the desired position.

4. Turn the temperature control dial to the desired position.

Operating tips

• Keep the windows closed while the air conditioner is in operation.
• After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly.
• The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication.
• A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
• If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. For additional information, refer to "If your vehicle overheats" in the "In case of emergency" section of this manual.

Controls

Heater operation

Air conditioner operation

Air flow charts