Nissan Versa

 Sedan Service Manual

Transmission & driveline » Transaxle & transmission (TM) » CVT Shift selector
Removal and Installation

CAUTION: Always apply the parking brake before performing removal and installation.

REMOVAL

1. Move the shift selector to the "N" position.
2. Remove the shift selector handle. Refer to TM "Disassembly and Assembly".
3. Remove the center console. Refer to IP "Removal and Installation".
4. Disconnect the harness connectors from CVT shift selector.
5. Move the shift selector to the "P" position.
6. Remove the key interlock cable from the CVT shift selector assembly. Refer to TM "Exploded View".
7. Remove the control cable from the CVT shift selector assembly. Refer to TM "Exploded View".
8. Remove the CVT shift selector assembly.

INSTALLATION

Installation is in the reverse order of removal.

• When connecting the control cable (1) to the CVT shift selector assembly (2), face the grooved surface of the rib (A) up and insert the control cable until it stops.

Removal and Installation

Disassembly and Assembly

Inspection and Adjustment