Nissan Versa

 Sedan Service Manual

Steering » Steering system (ST) » Steering column
Inspection

INSPECTION AFTER REMOVAL

• Check each part of steering column assembly for damage or other malfunctions. Replace if there are any abnormal conditions.
• Measure steering column rotating torque using Tool (A). Replace steering column assembly if the rotating torque is outside the standard.

Tool number : - (J-25765-A)

Rotating torque : Refer to ST "Steering Column Operating Range".

• Measure the steering column length (L) as shown, if vehicle has been involved in a minor collision. Replace steering column assembly (with motor, reduction gear, sensor) if (L) is outside the standard.

Steering column length (L) : Refer to ST "Steering Column Operating Range".

INSPECTION AFTER INSTALLATION

• Check each part of steering column assembly for damage or other malfunctions. Replace if there are any abnormal conditions.
• Check the steering wheel play, neutral position steering wheel, steering wheel turning force, and front wheel turning angle. Refer to ST "Inspection".
• Check tilt mechanism operating range (T) as shown.

Tilt operating range (T) : Refer to ST "Steering Column Operating Range".

Removal and Installation

Inspection