Nissan Versa

 Sedan Service Manual

Body exterior, doors, roof & vehicle security » Security control system (SEC) » B2603 Shift position
Component Inspection [CVT Shift Selector (Park Position Switch)]

1.CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)

1. Turn ignition switch OFF.

2. Disconnect CVT shift selector connector.

3. Check continuity between CVT shift selector (park position switch) terminals.       

Is the inspection result normal?

YES >> Inspection End.

NO >> Replace CVT shift selector. Refer to TM "Removal and Installation".

DTC Logic

Diagnosis Procedure

Component Inspection (Transmission Range Switch)

Component Inspection [CVT Shift Selector (Park Position Switch)]