Nissan Versa
Sedan Service Manual
Driver controls » Exterior lighting system (EXL) » Front combination lamp
Bulb Replacement

WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.

CAUTION:

Disconnect the battery negative terminal or remove power circuit fuse while performing the operation.
Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

HEADLAMP BULB

Removal

1. Disconnect the harness connector from the headlamp bulb.

2. Remove the cover.

3. Remove the retaining spring lock and the bulb from the front combination lamp.

Installation

Installation is in the reverse order of removal.

CAUTION: After installing the bulb, install the bulb socket securely for watertightness.

PARKING LAMP BULB

Removal

1. Rotate the bulb socket counterclockwise and remove.

2. Remove the bulb from the bulb socket.

Installation

Installation is in the reverse order of removal.

CAUTION: After installing the bulb, install the bulb socket securely for watertightness.

FRONT TURN SIGNAL LAMP BULB

Removal

1. Rotate the bulb socket counterclockwise and remove.

2. Remove the bulb from the bulb socket.

Installation

Installation is in the reverse order of removal.

CAUTION: After installing the bulb, install the bulb socket securely for watertightness.

More about «Front combination lamp»:

Removal and Installation